Fiber Optic

7 Terms To Understand If You Work with Fiber Optics

7 Terms To Understand If You Work with Fiber Optics

4 October 2017 | Reading Time: 3 minutes

Passive infrastructure is integral to ensuring effective networks today. Alongside aspects such as RF wireless infrastructure and structured cabling infrastructure design; it’s important that infrastructure professionals understand fiber to create more productive and effective networks.

Understand fiber to be more productive and effective:

Of course, for those working with fiber optics to make the right choice, and ensure productivity and effectiveness, it pays to know the language. While that may sound straightforward, with optical transmission, technical talk about data rates, bandwidth, loss, fiber core size and distances supported can be misleading.

To help, here are seven terms that anyone working with fiber optics needs to know about and understand:

1. Channel or Link Loss

Channel or link loss is the total path loss or attenuation between the transmitter and receiver is the sum of various loss mechanisms: scattering, microbending, macrobending and interconnection. These limit the maximum system length and the number of connections allowed.

fiber optic technicalities

2. Scattering

Scattering causes the intrinsic fiber loss dominated by what is known as Rayleigh scattering, which results from variations in density and compositions of the glass. This loss varies with the wavelengths of light applied.

3. Microbends and Macrobends

A microbend is a local deflection of the optical fiber axis, with amplitude much less than the optical fiber diameter. Microbends can cause a light ray to strike the fiber core-cladding interface at an extensive angle, allowing it to escape and increase loss. A macrobend is a bend or loop in the fiber with a radius of curvature of several millimeters or more, causing power to be lost from the core and inducing additional loss.

4. Interconnection loss

Interconnection loss associated with splices and connectors can be divided into intrinsic and extrinsic loss. Intrinsic mechanisms are a result of manufacturing tolerances on fiber core diameter, ovality, eccentricity and numerical aperture. Extrinsic mechanisms depend on the connection hardware and its ability to control separation between the fiber ends. Transverse, axial and angular misalignment of the fiber cores result in connector insertion loss.

5. Intersymbol Interference (ISI)

Within the optical fiber, bits of data are represented by pulses of light. Each pulse of light will spread, or disperse, over time as it travels along the length of the fiber. When these spreading pulses overlap, intersymbol interference results. The less intersymbol interference caused by dispersion, the greater the fiber’s capacity to transmit information. There are two main types of dispersion in optical fiber in the LAN environment.

6. Chromatic dispersion

Chromatic dispersion describes the tendency for different wavelengths to travel at different speeds in a fiber. If operated at wavelengths where chromatic dispersion is high, optical pulses tend to broaden as a function of time or distance and cause intersymbol interference. Although multimode fiber exhibits relatively high chromatic dispersion at the 850 nm wavelength, the use of controlled launch lasers (VCSELs) in gigabit networks and the distances in the LAN minimize the effects.

7. Modal dispersion

In multimode fiber systems the majority of the dispersion is caused by modal dispersion. Modal dispersion exists because the different light rays (modes) have a different optical path length along the fiber, therefore rays entering at the same time will not arrive at the far end of the fiber at the same time. Light travels faster in the low-index regions near the cladding and slower in the high-index regions near the center of the core. This dispersion effect limits the bandwidth as shown in the illustrations.


Get the Passive Infrastructure Training You Need to Improve Your Network

As fiber forms just one aspect of wider passive infrastructure, it’s important to have an understanding of all components to ensure network success.

To help you meet the increasing demands for network infrastructure, our Passive Infrastructure Specialist courses cover every aspect you need to know; from RF Wireless Infrastructure Fundamentals, to Fiber Optic Infrastructure, to Structured Cabling Design and more. You can take a look at the full course listing here.

Previous Next

Understand Passive Infrastructure That Underpins Your Network

To make the most of the opportunity, accessible passive infrastructure training is the gateway to success.


To start your free download, please provide your details below
[contact-form-7 404 "Not Found"]

Subscribe to our newsletter

Get the latest news from CommScope direct your inbox every month